PJURE Untertisch-Wasserfilter – Sauberes Leitungswasser in 10 Minuten
PJURE Untertisch-Wasserfilter – Sauberes Leitungswasser in 10 Minuten
With Advanced 3 + 1 Filtration Technolody
Ditch the bottle. PJURE's stainless steel under-sink filter delivers clean, mineral-rich tap water — every day, for a full year per filter. The 3+1 filtration removes chlorine, PFAS, microplastics and heavy metals, while keeping calcium and magnesium that make water taste good. One filter replaces up to 60,000 plastic bottles. 365 days. No electricity. No drilling.
Overview
Overview
PJURE is the stainless steel under-sink water filter that filters your tap water.
- Connects to your existing tap.
- Stays out of sight under your sink.
So you can stop buying bottled water. One filter. Replaced once a year.
Installation
Installation
PJURE fits neatly under your sink. It connects directly to your existing cold-water line and kitchen tap using a simple twist-lock system.
- Installed by you in 10 minutes
- No plumber required
- No drilling or mounting
Filtration
Filtration
Activated Carbon – Reduces chlorine, PFAS, and common chemical residues that affect taste and odor.
KDF – Helps reduce heavy metals and residual chlorine while supporting long-term system performance.
PP Membrane – Captures fine particles and protects the filtration system over time.
Mineralization – Natural mineral stones are used to refine taste after filtration. No distilled feel. Just water that tastes right.
What Our Customers Say
Mari
After 7 years of living in Lisbon where water quality is below average, it’s safe to say this filter has finally changed that! We can now give our baby water from the tap and what a relief it is to be able to skip the water bottles.
Easy to install, delicious water taste and the customer service we received was outstanding!
Andrea Roth
I was looking for a water filter that doesn't require changing of the existing faucets and that would not only filter the water but remineralise it as well. By chance I found PJURE and was immediately hooked as it met my needs and only requires to renew the filter once a year. Extra bonus - beautiful and durable design and installation without any need for drilling holes. The water tastes better than with my previous filter system and the water flow is the same as before using the filter, not the slow flowing drizzle that I once had with another under the sink filter system.
Filipa Sanches Carrilho
Very good material! The water has a much better taste, and it is really easy to install. The customer service team is also very friendly and helpful. We are super happy with this subscription.
Advanced 3 + 1 Filtration Technolody
Column
Certified to NSF/ANSI 53, and 42 standards for the reduction of PFAS (PFOA/PFOS), chlorine, and the smallest class of particles (≥0.5 micron).
Cleaner Water Starts With Better Filtration
Independently tested to NSF/ANSI 53, and 401 standards, to reduce lead, pharmaceuticals, VOCs, and other emerging contaminants.
How Pjure filters your tap water. Layer by layer
PP membrane
Our PP membrane captures fine sediment and protects water clarity.
It blocks microplastics, rust, and particles ≥5 μm before they reach the main filter stages.
By removing large contaminants early, it improves flow, extends filter life, and keeps the water crisp and clean.
Activated carbon block
A high-density activated carbon block removes chlorine, PFAS, chemical residues and improves taste & odor.
This stage targets the most common household contaminants and ensures fresh, clean-tasting drinking water.
Its ultra-absorptive structure traps harmful organic compounds before they pass through.
KDF (Copper–Zinc Alloy)
KDF provides powerful redox protection against heavy metals like lead, controls bacterial growth and reduces pesticides.
It also delivers enhanced chlorine reduction, strengthening the performance of the activated carbon stage.
This layer ensures safer, more stable water quality over time.
Calcite & Maifanite Mineralization
This stage uses natural calcite and maifanite to reintroduce essential minerals like calcium and magnesium for cleaner, smoother-tasting water. Calcite helps bring slightly acidic water back toward a neutral balance, while maifanite releases trace elements that enhance taste and support everyday hydration.
Perfect for Renters, Owners & Movers
Take it with you anywhere
No drilling, no tools, no stress. So if you are moving it's easy to bring the water filter along for your next adventure.
Install in 10 Minutes
No plumber needed. No electricity. Just clean water, instantly.
A Filter That Lasts 365 Days
Clean Water. Minimal Effort.
Each PJURE filter lasts a full year. Giving you clean, mineral-rich water with minimal effort.
Easy Change
A simple twist to replace. No tools, no mess. Done in seconds.
Quick Answers
Will it fit my kitchen?
Will it fit my kitchen?
Yes! The PJURE system fits perfectly in a standard 60 cm under-sink cabinet or drawer.
It comes with a 3/8” → 1/2” adapter set, making it compatible with all standard EU hoses — no extra fittings needed.
How do I install it?
How do I install it?
Installation takes just a few minutes — no plumber needed. Make sure to have an adjustable wrench at hand to help loosen and tighten the cold water outlet connection.
- Turn off the cold-water supply and open the faucet to release pressure.
- Connect the inlet hose to your cold-water line.
- Connect the outlet hose to your faucet line.
- Use the included 3/8” → 1/2” adapter set if needed (fits all EU hoses).
- Turn on the water and flush for 5 minutes before first use.
Your system comes pre-assembled — ready to plug in and enjoy purified water right away!
How do I replace the filter, and when?
How do I replace the filter, and when?
Replacing your PJURE filter is quick and simple
- Turn off the cold-water supply and open the faucet to release pressure.
- Use the included wrench to unscrew the stainless-steel housing and remove the old cartridge.
- Insert the new PJURE filter and tighten the housing securely.
- Turn the water back on and flush for 5 minutes before use.
You will get an email reminder when it’s time to replace your filter — Every 12 months.
What does it remove and add back?
What does it remove and add back?
Removes
- Bacteria, parasites & cysts
- Chlorine, chloroform & VOCs
- Lead & heavy metals
- PFAS & microplastics (down to ~1 μm)
- Pharmaceutical & hormone residues
- Sediment, turbidity & bad taste/odor
Adds back:
- Essential minerals (Ca, Mg, K) for smooth, natural taste
- Natural electrolyte balance for hydration
- Supports body function & immunity
By removing acid-forming contaminants and restoring essential minerals, PJURE produces naturally pH-balanced water — around 7.5.
What is the water pressure and flow rate?
What is the water pressure and flow rate?
The flow rate is about 3.8 liters per minute, tested under 4.1 bar, which is typical water pressure in most European homes.
To put it simply, your existing water pressure stays the same with a steady water stream. No pressure drop, no weak trickle.
Your tap will work just like before, only better! Now with clean, mineral-rich water coming out.
Whats the difference between Pjure and Reverse Osmosis?
Whats the difference between Pjure and Reverse Osmosis?
Reverse Osmosis (RO) pushes water through an ultra-fine membrane using high pressure. It removes almost everything — including contaminants and the natural minerals (like calcium and magnesium) that the body actually needs. The result is extremely pure water, but often too pure: it can become slightly acidic (pH below 7) and less hydrating.
PJURE, on the other hand, uses a 4-layer filtration system:
- 3 layers to purify (removing bacteria, heavy metals, VOCs, chlorine, etc.)
- 1 final layer to add minerals back in – helping the water reach a natural, slightly alkaline pH of ~7.5, which supports taste, hydration and overall wellbeing.
Unlike RO, PJURE doesn’t require electricity or a bulky pressure tank, making it compact and easy to install under any sink — in just 10 minutes.
Do I need a plumber?
Do I need a plumber?
No – it’s a simple 10-minute DIY installation!
You might need an adjustable wrench to loosen and tighten the cold water outlet connection.
The filter housing itself can easily be installed by hand using the included wrench.
What’s Included
What’s Included
Everything you need comes pre-assembled — just connect it to your cold-water line and start enjoying purified water.
Included in the box:
- Pre-assembled PJURE Stainless Steel Filter System
- Multi-stage filter cartridge (already installed)
- 3/8” → 1/2” adapter set (fits all EU hoses)
- Filter housing wrench (for future replacements)
- Printed manual in 9 languages (EN, DE, FR, NL, NO/SE/DK, ES, PT, IT, PL)
🕒 You’ll also receive an email reminder when it’s time to replace your filter — every 12 months.