Life changing!!!! Can't believe I have been running to the store dragging heavy bottles when this was so easy. Super easy to install, probably took me 5 minutes, and I am not super handy. And the water tastes amazing! I could taste the difference instantly. I never considered before how much money we also actually spent on water. I calculated that we almost spent 2 euros pr. day, coming to 730 pr year! Insane. This filter saves both time, effort and money. LOVE IT.
- Works with your existing tap
- Full flow, 3.8 L/min
- No electricity. No wastewater.
Well-built, complete kit, easy to install even for first-timers
PJURE is independently tested to reduce chlorine by at least 97% through 30,000 litres — and keeps the calcium and magnesium in your water, for better-tasting water for drinking, coffee and cooking.
Tested to NSF/ANSI 42 for chlorine
At least 97% chlorine reduction through the full 30,000 litres
What is NSF?
NSF is an independent public-health organisation, founded in 1944 in Ann Arbor, Michigan. It writes the standards that drinking-water filters around the world are tested against. NSF/ANSI 42 covers aesthetic effects — the chlorine, taste and odour you notice in tap water.
What does the test require?
Water with 2.0 mg/L free chlorine runs through the filter at a set flow, pressure and temperature. To pass, the filtered water must stay at or below 1.0 mg/L — at least 50% reduction. In PJURE's filtered water, chlorine stayed below the lab's detection limit (0.05 mg/L) at every point.
- ≥97%
- Chlorine reduction at all 11 measurement points
- 30,000
- Litres tested — the full filter capacity
- <0.3%
- Copper & zinc release of the permitted limit
Tested from the first litre
Chlorine reduction through the cartridge's life (at least 97% at every point)
Independent test · ISO/IEC 17025-accredited laboratory, USA · NSF/ANSI 42-2021 · Dec 2022 – Feb 2023 · 2 cartridges · 3.8 L/min, 50/50 on-off cycle, 20 °C, pH 7.5, 2.0 mg/L free chlorine. Production quality check (manufacturer, Jan 2025): 98.4–99.4% through 3,000 litres. Results reflect laboratory conditions; actual performance may vary with local water quality and use.
3+1 filtration, minerals kept
Removes what you don't want. Keeps what you do.
Five filter layers in 3 cleaning stages and 1 mineral stage — each doing one job, inside a stainless steel housing.
-
1
Sediment filtration
Two layers — a pre-filter and a fine membrane — catch sand, rust and particles, and protect the stages after them.
-
2
Activated carbon block
Coconut-shell carbon reduces chlorine, bad taste and odour, and a wide range of organic compounds.
-
3
KDF copper-zinc
Reduces chlorine and certain heavy metals such as lead and mercury, and keeps bacteria from growing in the filter.
-
+1
Mineral stage
Calcite and maifanite balance the pH and keep the calcium and magnesium that make water taste good.
12-month filter life
One filter. A full year.
Each PJURE filter lasts 12 months, or up to 30,000 litres — enough drinking and cooking water for a typical household for a whole year. No monthly cartridges, no jugs to refill.
- 12
- Months per filter
- 30,000
- Litres filter capacity
- 60,000
- Plastic bottles replaced (0.5 L)
-
1
We remind you
You get an email when it's time to change the filter — no need to keep track.
-
2
The new filter comes to you
With Subscribe & Save, a replacement filter is delivered once a year for €39. Cancel anytime.
-
3
Swap it in minutes
Turn off the water, unscrew the housing with the included wrench, insert the new filter and flush for 5 minutes. No plumber, no tools to buy.
Why every year? Activated carbon slowly fills up as it captures chlorine and other substances. Changing it yearly keeps the filtration — and the taste — consistent. Actual lifespan depends on your water quality and use.
100-day risk-free trial
Try PJURE at home. Not happy? Send it back.
You have 100 days from delivery to make sure PJURE is right for your home. We'd rather you love it than keep it.
-
1
Not 100% happy?
Email us within 100 days of delivery and we'll sort it out. This covers the filter system — please send it back complete and in good shape.
-
2
Changed your mind before opening?
Return it unused in the original packaging. Returns are free, and we refund the product price to your original payment method — usually within 7 days.
-
3
Something not working?
We'll troubleshoot with you first. If it still doesn't work, we replace it at no extra cost.
Replacement filters can't be returned once opened, for hygiene reasons (unless something is genuinely wrong with them). To start a return, email hello@mypjure.com with your order number.
Free EU shipping
Tracked delivery to your door.
- 3–7
- Business days EU mainland
- 1–3
- Business days express (EU)
- 5–10
- Business days non-EU Europe
-
1
We pack your order
Orders are processed Monday–Friday (excluding public holidays) and you get an email when it ships.
-
2
Follow it all the way
Every order comes with a tracking link.
-
3
Same day in Lisbon
Selected Lisbon postcodes can get 2-hour / same-day delivery for an extra fee — you'll see it at checkout if it's available.
Islands and remote areas may take longer, depending on the carrier.
- Works with your existing tap
- Full flow, 3.8 L/min
- No electricity. No wastewater.
Well-built, complete kit, easy to install even for first-timers
Overview
Overview
PJURE is a stainless steel under-sink water filter for European kitchens. It connects to the cold-water line under your sink and filters the water from your existing kitchen tap — no extra faucet, no jug, no bottles.
- 3+1 filtration reduces chlorine — at least 97% through 30,000 litres, independently tested
- Keeps the calcium and magnesium that give water its taste
- Food-grade 304 stainless steel housing
- One filter a year — up to 30,000 litres
- No electricity, no wastewater
100-day risk-free trial and 2-year warranty.
Installation
Installation
PJURE stands in the cabinet under your sink and connects between the cold-water line and your existing kitchen tap, using the included hoses and adapters.
- About 10 minutes, no plumber
- No drilling, no mounting, no electricity
- An adjustable wrench helps loosen the tap hose connection
- Flush for 5 minutes before first use
Watch the installation video (1:12)
See how it connects (diagram)
Filtration & specs
Filtration & specs
Filtration
- 3+1 filtration: 3 cleaning stages + 1 mineral stage
- PET pre-filter and PP membrane catch sediment
- Coconut-shell carbon block reduces chlorine, taste and odour
- KDF copper-zinc media reduces free chlorine by redox
- Calcite and maifanite: calcium and magnesium stay in the water
Performance
- ≥97% chlorine reduction through 30,000 litres, tested to NSF/ANSI 42
- Flow rate: 3.8 L/min at 4.1 bar
- Filter life: 12 months or 30,000 litres
- No electricity, no wastewater
Materials & craftsmanship
- Food-grade 304 stainless steel housing
- Rust- and corrosion-resistant
- Quality built to last, replace only the filter
Will it fit?
- Built for European kitchens — guaranteed to fit yours
- Works with your existing kitchen tap
- Fits standard 3/8" and 1/2" connections — converters included
- Works with any cold tap water that's safe to drink
- No drilling — perfect for both renters and homeowners
In the box
- Filter housing, first filter fitted
- Inlet and outlet hoses
- Quick-connect fittings (IN and OUT)
- Blue lock clips
- 3/8"–1/2" converters
- Wrenches
- Plumber's tape
- Manual
Dimensions & details
- Height: 28 cm
- Diameter: 9 cm
- Weight: 2.25 kg
- Operating pressure: 1–6.9 bar · Water temperature: 5–38 °C
- Warranty: 2 years
- Full technical documentation
Set up in about 10 minutes
Installation done in 1-2-3.
Installation done in 1-2-3.
water outlet Faucet hose Inlet hose Outlet hose
- 1 Disconnect the faucet hose from the cold-water outlet
- 2 Connect the inlet hose to the cold-water outlet.
- 3 Connect the outlet hose to the faucet hose.
What Our Customers Say
Mari
After 7 years of living in Lisbon where water quality is below average, it’s safe to say this filter has finally changed that! We can now give our baby water from the tap and what a relief it is to be able to skip the water bottles.
Easy to install, delicious water taste and the customer service we received was outstanding!
Andrea Roth
I was looking for a water filter that doesn't require changing of the existing faucets and that would not only filter the water but remineralise it as well. By chance I found PJURE and was immediately hooked as it met my needs and only requires to renew the filter once a year. Extra bonus - beautiful and durable design and installation without any need for drilling holes. The water tastes better than with my previous filter system and the water flow is the same as before using the filter, not the slow flowing drizzle that I once had with another under the sink filter system.
Filipa Sanches Carrilho
Very good material! The water has a much better taste, and it is really easy to install. The customer service team is also very friendly and helpful. We are super happy with this subscription.
Advanced 3+1 Filtration Technology
Lab-Tested Chlorine Reduction
Independently tested to NSF/ANSI 42: at least 97% chlorine reduction through the full 30,000-litre capacity.
Cleaner Water Starts With Better Filtration
What each layer does, what has been tested on PJURE and what hasn't — explained in our technical documentation.
How Pjure filters your tap water. Layer by layer
PP membrane
A pre-filter and a fine PP membrane capture sediment and protect water clarity.
They catch sand, rust and other particles before they reach the main filter stages.
By removing larger particles early, they protect the flow and extend filter life.
Activated carbon block
A high-density coconut-shell carbon block reduces chlorine and improves taste & odour.
Activated carbon adsorbs many organic compounds and is the most studied home technology for PFAS. PJURE itself has not been tested for PFAS.
How we know →
KDF (Copper–Zinc Alloy)
KDF 55 copper-zinc media reduces free chlorine through a redox reaction, before the water reaches the carbon block.
Independently tested: copper and zinc release from this stage stayed below 0.3% of the NSF/ANSI 42 limits over 30,000 litres.
How we know →
Calcite & Maifanite Mineralization
This stage uses natural calcite and maifanite to keep essential minerals like calcium and magnesium in balance for cleaner, smoother-tasting water. Calcite helps bring slightly acidic water back toward a neutral balance, while maifanite releases trace elements that enhance taste and support everyday hydration.
Perfect for Renters, Owners & Movers
Take it with you anywhere
No drilling, no tools, no stress. So if you are moving it's easy to bring the water filter along for your next adventure.
Install in 10 Minutes
No plumber needed. No electricity. Just clean water, instantly.
A Filter That Lasts 365 Days
Clean Water. Minimal Effort.
Each PJURE filter lasts a full year. Giving you clean, mineral-rich water with minimal effort.
Easy Change
A simple twist to replace. No tools, no mess. Done in seconds.
Quick Answers
The questions we hear most about fitting, installing and living with PJURE.
Will it fit my kitchen?
Will it fit my kitchen?
Yes! The PJURE system fits perfectly in a standard 60 cm under-sink cabinet or drawer.
It comes with a 3/8” → 1/2” adapter set, making it compatible with all standard EU hoses — no extra fittings needed.
How do I install it?
How do I install it?
Installation takes just a few minutes — no plumber needed. Make sure to have an adjustable wrench at hand to help loosen and tighten the cold water outlet connection.
- Turn off the cold-water supply and open the faucet to release pressure.
- Connect the inlet hose to your cold-water line.
- Connect the outlet hose to your faucet line.
- Use the included 3/8” → 1/2” adapter set if needed (fits all EU hoses).
- Turn on the water and flush for 5 minutes before first use.
Your system comes pre-assembled — ready to plug in and enjoy filtered water right away!
How do I replace the filter, and when?
How do I replace the filter, and when?
Replacing your PJURE filter is quick and simple
- Turn off the cold-water supply and open the faucet to release pressure.
- Use the included wrench to unscrew the stainless-steel housing and remove the old cartridge.
- Insert the new PJURE filter and tighten the housing securely.
- Turn the water back on and flush for 5 minutes before use.
You will get an email reminder when it’s time to replace your filter — Every 12 months.
What does it reduce — and what does it keep?
What does it reduce — and what does it keep?
Tested on PJURE
- Free chlorine: at least 97% reduction through the full 30,000 litres (NSF/ANSI 42)
- Chlorine taste & odour
What the technology targets (not tested on PJURE)
- VOCs and disinfection by-products (activated carbon)
- Long-chain PFAS (activated carbon — see the research)
- Sediment and particles (pre-filter and PP membrane)
Keeps
- Calcium & magnesium for a smooth, natural taste
What is the water pressure and flow rate?
What is the water pressure and flow rate?
The flow rate is about 3.8 liters per minute, tested under 4.1 bar, which is typical water pressure in most European homes.
To put it simply, your existing water pressure stays the same with a steady water stream. No pressure drop, no weak trickle.
Your tap will work just like before, only better! Now with clean, mineral-rich water coming out.
What's the difference between PJURE and reverse osmosis?
What's the difference between PJURE and reverse osmosis?
Reverse Osmosis (RO) pushes water through an ultra-fine membrane using high pressure. It removes almost everything — including the calcium and magnesium that give water its taste — and sends part of the water to the drain. Many RO systems therefore add a separate remineralisation stage.
PJURE, on the other hand, uses 3+1 filtration:
- 3 cleaning stages that reduce chlorine, taste and odour, sediment and many organic compounds
- 1 mineral stage that keeps calcium and magnesium in the water for a natural taste
Unlike RO, PJURE needs no electricity, no pressure tank and sends no water to the drain — and it installs under any sink in about 10 minutes.
Do I need a plumber?
Do I need a plumber?
No – it’s a simple 10-minute DIY installation!
You might need an adjustable wrench to loosen and tighten the cold water outlet connection.
The filter housing itself can easily be installed by hand using the included wrench.
Does PJURE soften hard water?
Does PJURE soften hard water?
No — PJURE doesn't soften water or remove the calcium and magnesium that cause hardness, because those are exactly the minerals it's designed to keep.
If limescale buildup on appliances is your main concern, that's a separate problem a water softener addresses. PJURE focuses on taste, chlorine and sediment — not water hardness.
Customer reviews
4.7/5
Customers say
Customers praised the easy installation and premium stainless steel construction. The filter "makes water taste amazing" and eliminates chemical odors. Some noted reduced water pressure and minimal TDS changes. One customer reported significant customer service issues with refund processing.
Summarized by AI from customer reviews
I absolutely love my new PJURE Filter! I’ve been looking for so long for an easy solution that doesn’t take up space on the countertop or require filter changes every month. This one is perfect! It was super easy to install, and since we’re renting, it’s a huge plus that we can easily bring it with us when we move. We could taste the difference immediately. I will recommend this to all my friends!
Super easy to install and the difference was immediate. The filtered water tastes amazing!
Don’t believe the return policy!
I purchased a PJURE filter several months ago. Unfortunately, it wasn’t able to be installed with my kitchen sink water set up, so I needed to return the filter for a full refund.
I called the company 3 times - the calls were never answered. So, I wrote an email explaining the need to return the filter. Over. Week later, I received a response from the company. It was an apology for the delay in response and an offer to help guide me to install it if I sent photos of the pipes under my sink. I sent the photos and several days later I was told that it can’t be installed there and they would issue a refund. I was asked how I wanted to receive the refund, which I responded to immediately via email.
I never heard another word from the PJURE company. I wrote to the same email address at least 4 more times requesting the refund ….ZERO response. I eventually gave up. My money is gone, PJURE lied about its return policy or is hiding behind poor customer service to keep my money.
Buyer beware!
I very happy about the water and the installation was super easy
Cumple perfectamente con todo lo que ofrecen!!!
Excellent filter, easy to install!
Beside getting rid of all the nasties in the water, I was pleasantly surprised by how much difference the filter made to the taste of our water, it is amazing! Coffee tastes better- we can even taste the difference in how the pasta taste.
I’ve been using the PJURE Stainless Steel Water Filter for a few weeks and it noticeably reduces the chemical smell and taste of tap water, making it cleaner and more pleasant to drink. The water pressure is reduced but still acceptable—no major issues for everyday use. The build quality is very nice: the stainless‑steel housing feels sturdy and premium, and installation was straightforward.
My TDS meter showed no change, so don’t expect the mineral composition of the water to be altered; this is more about taste and odor than removing minerals. Also, no lab test was done, so I can’t verify any claims about heavy‑metal or microplastic removal—only the taste, smell, and feel at the tap.
Easy setup, compact storage, good water.
Perfect.
Reply from PJURE
Thank you, Greg!
Very good material! The water has a much better taste, and it is really easy to install. The customer service team is also very friendly and helpful. We are super happy with this subscription
Reply from PJURE
Thank you for the amazing feedback, Filipa!
We are happy to hear that you are enjoying clean, great tasting water!
Have an amazing day
Easy fix !
Reply from PJURE
Thanks for the review and for choosing PJURE Mirjam! Means a lot!
- Team PJURE
I was looking for a water filter that doesn't require changing of the existing faucets and that would not only filter the water but remineralise it as well. By chance I found PJURE and was immediately hooked as it met my needs and only requires to renew the filter once a year. Extra bonus - beautiful and durable design and installation without any need for drilling holes. The water tastes better than with my previous filter system and the water flow is the same as before using the filter, not the slow flowing drizzle that I once had with another under the sink filter system.
My only recommendation - make the installation manual and video really idiot proof. I'm a technical dummy and made a few mistakes while installing the filter like not noticing that there is a difference between the inlet and outlet hose. Better marking would help avoid that moment of panic...
Reply from PJURE
Thank you for taking your time writing such a detailed review, Andrea. We are stoked you are happy with the product! Thanks for choosing PJURE and we will look at the improvements you suggest! I can assure you we are working with better content as we speak. Thanks again - Lars
Quality of steel is good but comes to water I didn’t feel much difference after few iterations felt as same as before.
Reply from PJURE
Thank you for your review!
If the chlorine levels are already low in your tap water, the taste difference might be more subtle.
But there are a lot of other nasties you are no avoiding - so you can be assured the water in your tap is cleaner than before. Let me know if you have any questions and we are here to help!
Não consegui desapertar o filtro com a chave para substituir o cartucho do filtro no futuro. É preciso fazer muita força?
Reply from PJURE
Obrigado pelo seu comentário 😊
Na primeira vez, o filtro pode estar bastante apertado — isso é normal, pois vem bem fechado de fábrica para garantir a vedação durante o transporte. Não tenha receio de aplicar um pouco mais de força para desapertar.
Quando voltar a fechar após a substituição do cartucho, não é necessário apertar tanto — apenas até ficar bem selado.
Caso precise de ajuda ou queira alguma orientação durante a troca, estamos sempre disponíveis para ajudar.
Tudo com anunciado, excelente!
Well-built, complete kit, easy to install even for first-timers
Excellant
Its quite early to say. But the water tastes good with nothing unusual;)
It is a great water filter, easy installatiob and the water tastes amazing!
There is just one Thing not so clean from the manual. Where do the lock clips, shown in the fig. Components included, have to placed?
Once again thanks for the good Support and the Fast delivery!
Easy mounting and great quality product.
I did so much research before I randomly stumbled over this, and I am so glad I did as I was close to buying a (very ugly) and expensive reverse osmosis system, to later learn it takes away all the minerals. This not only makes the water taste great, but with all the documentation they provide I feel very safe! And it was easy to install for real, even for me (and im not handy at all haha)
After 7 years of living in Lisbon where water quality is below average, it’s safe to say this filter has finally changed that! We can now give our baby water from the tap and what a relief it is to be able to skip the water bottles.
Easy to install, delicious water taste and the customer service we received was outstanding!
High-quality stainless steel filter that really makes difference.
Impressed with the quality and performance. Totally worth it!
Great quality filter — works perfectly!
27 reviews
- Choosing a selection results in a full page refresh.
- Opens in a new window.
